TH 
140-SAS AUTOMATIC CAPILLARY RHEOMETER
24 ตุลาคม 2567
ผู้ชม 15 ผู้ชม
- This tester evaluates the flow feature of molten plastic during the forming process.
- The molten test specimen inside the cylinder that is set at a specific temperature will be extruded from the capillary die.
- During the extrusion, the shear stress and the shear viscosity is detected to measure the melt viscosity of the test specimen.
- The tester is equipped with an automatic cleaning system which enables the operator to continuously run 1 test cycle.
- The tester can be chosen between the light load type and the heavy load type according to the test specimen’s maximum load.
JIS K7199、ASTM D3835、ISO 11443
|
Specifications are subject to change without notice. |
||
|
Model |
No.140-SAS LIGHT LOAD |
No.140-SAS HEAVY LOAD |
|
Hangings |
1 Hanging |
1 Hanging |
|
Maximum Load |
Max. 10 kN |
Max. 20 kN |
|
Load Measuring |
Load Cell: Max. 10 kN (Scale 0.1 kN) |
Load Cell, Max. 20 kN (Scale 0.1 kN) |
|
Ram Speed |
0.5 to 500 mm/min |
0.5 to 1,000 mm/min |
|
Capillary Die |
φ0.5 to φ2 mm, L/D (To be specified) |
φ0.5 to φ2 mm, L/D (To be specified) |
|
Piston |
φ9.510 ± 0.005 mm, L6.35 ± 0.10 mm |
φ9.510 ± 0.005 mm, L6.35 ± 0.10 mm |
|
Cylinder |
Inner φ9.550 ± 0.025 mm, L160 mm |
Inner φ9.550 ± 0.025 mm, L200 mmm |
|
Temperature Range |
Max. 400 °C |
Max. 400 °C |
|
Software |
Windows Compatible |
Windows Compatible |
|
Accessories |
Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun, Ratchet Wrench |
Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun, Ratchet Wrench |
|
Option |
Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor |
Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor |
|
Power Source |
AC 200 V, 1-Phase, 10 A, 50/60 Hz |
AC 200 V, 1-Phase, 10 A, 50/60 Hz |
|
Air Source |
0.5 MPa or More |
0.5 MPa or More |
|
Dimensions/ Weight (Approx.) |
W620 × D650 × H1,170 mm/ 153 kg |
W620 × D600 × H1,460 mm, 205 kg |
