- This tester is used to evaluate the heat resistance of plastic.
- By loading specified bending stress to the test specimen while increasing the test temperature of the oil bath at a certain rate, the operator is to report the temperature at which the test specimen reaches standard deflection.
- The tester can also conduct the VICAT softening temperature test.
JIS K7191-1、K7206、ASTM D648、D1525、ISO 75-1、306
Specifications are subject to change without notice. |
||
Model |
No.252-UL-94 (MANUAL) |
No.252-UL-94 (ELECTRIC SYSTEM) |
Chamber |
1,000 × 560 × 900 mm(Volume Approx. 0.5 m3) |
1,000 × 560 × 900 mm(Volume Approx. 0.5 m3) |
Specimen |
L125 ± 5 mm, W13.0 ± 0.5 mm, T13 mm or less |
L125 ± 5 mm, W13.0 ± 0.5 mm, T13 mm or less |
Burner |
L100 ± 10 mm, Inner Diameter φ9.5 ± 0.3 mm |
L100 ± 10 mm, Inner Diameter φ9.5 ± 0.3 mm |
Burner Base |
Slide type (With Operation Handle), Inclination Angle 45 ± 2°, 20 ± 5° (5 V) |
Slide type (With Jog Dial type Controller), Inclination Angle 45 ± 2°, 20 ± 5° (5 V) |
Burner Calibration Device |
Flow Meter: Max.150 ml/min (Scale 2 ml/min) (Standard 105 ml/min) |
Flow Meter: Max.150 ml/min (Scale 2 ml/min) (Standard 105 ml/min) |
Accessories |
Flame Gauge (20 mm) (Option: 125 mm & 38 mm), Ring Stand, |
Flame Gauge (20 mm) (Option: 125 mm & 38 mm), Ring Stand, |
Option |
Horizontal Burning Support Fixture (HB), |
Horizontal Burning Support Fixture (HB), |
Power Source |
AC 100 V, 1-Phase, 15 A, 50/60 Hz |
AC 100 V, 1-Phase, 10 A, 50/60 Hz |
Heat Source |
Methane Gas (Purity: 98 % Over) |
Methane Gas (Purity: 98 % Over) |
Dimensions/ Weight (Approx.) |
W1,400 × D700 × H1,220 mm 100 kg |
W1,400 × D700 × H1,220 mm 218 kg |