TH 
170 CLASH-BERG TORSION FLEXIBILITY TESTER (MANUAL)
หมวดหมู่สินค้า: Plastic testing and processing
31 ตุลาคม 2567
ผู้ชม 17 ผู้ชม
- This tester is used to measure the softening temperature of plastic.
- The test specimen is to be attached to the upper and lower Chucks of the tester and then dipped into water which the temperature is raised at a constant speed.
- At every 5 °C the water temperature has rises, the operator is to leave the test specimen untouched for 3 minutes.
- After the 3 minutes have passed, twisting torque is to be added to the test specimen so that the rigidity coefficient can be calculated from the twisting angle.
- The softening temperature will be acquired from the temperature-rigidity coefficient curving line.
JIS (K6734), (K6745), K6924-2, ASTM D1043, ISO 458
|
Specifications are subject to change without notice. |
|
|
Model |
No.170 CLASH-BERG TORSION FLEXIBILITY TESTER (MANUAL) |
|
Specime |
W6.35 ± 0.03 mm, L64 mm, T0.8 to 1.5 mm |
|
Chuck Distance |
40 mm |
|
Angle Scale |
0 to 360° (Scale 1°) |
|
Temperature Range |
-60 to 100 °C (Dry Ice Cooling) |
|
Heat-Up Speed |
2 °C/min |
|
Torque Device |
Pulley Type |
|
Weight |
5 g, 10 g, 20 g, 50 g |
|
Software |
― |
|
Accessories |
Duwar Flask, Thermometer: 2 pcs, Specimen Cutter, |
|
Power Source |
AC 100 V, 1-Phase, 10 A, 50/60 Hz |
|
Dimensions/ Weight (Approx.) |
W300 × D400 × H900 mm, 36 kg |
