TH 
- This tester is to evaluate the abrasion resistance of enamel wire.
- Abrading the enamel wire with a piano wire which continuously increases the abrading load while it abrades the enamel wire, the operator is to check the load at which the conduction occurs.
- By turning the test specimen, one test specimen can be tested 3 times.
JIS (C3003), C3216-3, IEC-60851-3, IEC-60851-3, NEMA-C9.5
|
Specifications are subject to change without notice. |
|
|
Abrading Distance |
100 mm |
|
Abrading Speed |
400 ± 40 mm/min |
|
Weight Load Range |
Initial 100 gf to Max. 3.2 kgf |
|
Scraping Piano Wire |
φ0.23 ± 0.01 mm |
|
Specimen Rotating Angle |
0°, 120°, 240° |
|
Option |
Safety Cover |
|
Power Source |
AC 100 V, 1-Phase, 5 A, 50/60 Hz |
|
Dimensions/ Weight (Approx.) |
W560 × D470 × H490 mm, 45 kg |
