TH 
252-UL-94 PLASTIC FLAMMABILITY TESTER
24 ตุลาคม 2567
ผู้ชม 13 ผู้ชม
- This tester is used to evaluate the burn-resistance of plastic according to the vertical flaming test (V) and horizontal flaming test (HB).
- The tester has been improved so that the operator can conduct the test easily by using the jog dial type controller and the touch panel display also equipped with voice guidance.
- With these functions, the operator can concentrate in watching the condition of the test specimen while controlling the burner to adjust the distance between the flame and the test specimen.
- Adding the option jigs, the tester will enable to carry out other test methods (5V, VTM, HBF, HF).
UL-94、JIS K6911、ASTM D635、D3801、D4804、D5025、D5207、ISO 1210
|
Specifications are subject to change without notice. |
||
|
Model |
No.252-UL-94 (MANUAL) |
No.252-UL-94 (ELECTRIC SYSTEM) |
|
Chamber |
1,000 × 560 × 900 mm(Volume Approx. 0.5 m3) |
1,000 × 560 × 900 mm(Volume Approx. 0.5 m3) |
|
Specimen |
L125 ± 5 mm, W13.0 ± 0.5 mm, T13 mm or less |
L125 ± 5 mm, W13.0 ± 0.5 mm, T13 mm or less |
|
Burner |
L100 ± 10 mm, Inner Diameter φ9.5 ± 0.3 mm |
L100 ± 10 mm, Inner Diameter φ9.5 ± 0.3 mm |
|
Burner Base |
Slide type (With Operation Handle), Inclination Angle 45 ± 2°, 20 ± 5° (5 V) |
Slide type (With Jog Dial type Controller), Inclination Angle 45 ± 2°, 20 ± 5° (5 V) |
|
Burner Calibration Device |
Flow Meter: Max.150 ml/min (Scale 2 ml/min) (Standard 105 ml/min) |
Flow Meter: Max.150 ml/min (Scale 2 ml/min) (Standard 105 ml/min) |
|
Accessories |
Flame Gauge (20 mm) (Option: 125 mm & 38 mm), Ring Stand, |
Flame Gauge (20 mm) (Option: 125 mm & 38 mm), Ring Stand, |
|
Option |
Horizontal Burning Support Fixture (HB), |
Horizontal Burning Support Fixture (HB), |
|
Power Source |
AC 100 V, 1-Phase, 15 A, 50/60 Hz |
AC 100 V, 1-Phase, 10 A, 50/60 Hz |
|
Heat Source |
Methane Gas (Purity: 98 % Over) |
Methane Gas (Purity: 98 % Over) |
|
Dimensions/ Weight (Approx.) |
W1,400 × D700 × H1,220 mm 100 kg |
W1,400 × D700 × H1,220 mm 218 kg |
