TH 
120-FWP MELT FLOW INDEX TESTER (MANUAL)
09 กันยายน 2567
ผู้ชม 13 ผู้ชม
- This tester is for measuring the melt flow index of thermo-plastic.
- The test can be conducted easily, from setting the test condition up to data analysis, using a 5.7” full color touch panel.
JIS K6719-1/2、K6921-2、K6922-2、K6923-1、K6924-1、K6926-2、K7210、ASTM D1238、ISO 1133
|
Specifications are subject to change without notice. |
|
|
Hangings |
1 Hanging |
|
Die |
φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm |
|
Piston |
Head Diameter φ9.474 ± 0.007 mm, Head Length L6.35 ± 0.10 mm |
|
Cylinder |
Inner φ9.550 ± 0.007 mm, L160 mm |
|
Temperature Range |
Max. 400 °C |
|
Initial Weight |
0.325 kgf |
|
Additional Weight |
1.20 〜 21.60（※ Please refer below） |
|
Test Method |
Method A: Manual (Option: Automatic Cutter) |
|
Data Processing |
Method A: Automatic (Measuring the weight of the cut off specimen is done by hand) |
|
Method B Measuring |
Rotary Encoder |
|
Standard Specification |
SD Card Slot, LAN Port |
|
Option |
Mini Printer, Method A Air Pressure Type Automatic Cutter, Manual Type Die Plug, Safety Cover with Interlock Attached, Half Die, Air Pressure Type Automatic Loader (No.120-FWP-W) |
|
Accessories |
Cleaning Rod (Die & Cylinder), Injection Rod, Funnel, Die Gauge, Method A Cutting Knife, Spirit Level, Gauze |
|
Power Source |
AC 100 V, 1-Phase, 15 A, 50/60 Hz or |
|
Air Source |
0.5 MPa or More(For Method A Pneumatic Type Weight Loading Device Specification) |
|
Dimensions/ Weight(Approx.) |
No.120FWP: W660× D450 × H1,020 mm/75 kg |
