140-SAS AUTOMATIC CAPILLARY RHEOMETER
24 ตุลาคม 2567
ผู้ชม 14 ผู้ชม
- This tester evaluates the flow feature of molten plastic during the forming process.
- The molten test specimen inside the cylinder that is set at a specific temperature will be extruded from the capillary die.
- During the extrusion, the shear stress and the shear viscosity is detected to measure the melt viscosity of the test specimen.
- The tester is equipped with an automatic cleaning system which enables the operator to continuously run 1 test cycle.
- The tester can be chosen between the light load type and the heavy load type according to the test specimen’s maximum load.
JIS K7199、ASTM D3835、ISO 11443
Specifications are subject to change without notice. |
||
Model |
No.140-SAS LIGHT LOAD |
No.140-SAS HEAVY LOAD |
Hangings |
1 Hanging |
1 Hanging |
Maximum Load |
Max. 10 kN |
Max. 20 kN |
Load Measuring |
Load Cell: Max. 10 kN (Scale 0.1 kN) |
Load Cell, Max. 20 kN (Scale 0.1 kN) |
Ram Speed |
0.5 to 500 mm/min |
0.5 to 1,000 mm/min |
Capillary Die |
φ0.5 to φ2 mm, L/D (To be specified) |
φ0.5 to φ2 mm, L/D (To be specified) |
Piston |
φ9.510 ± 0.005 mm, L6.35 ± 0.10 mm |
φ9.510 ± 0.005 mm, L6.35 ± 0.10 mm |
Cylinder |
Inner φ9.550 ± 0.025 mm, L160 mm |
Inner φ9.550 ± 0.025 mm, L200 mmm |
Temperature Range |
Max. 400 °C |
Max. 400 °C |
Software |
Windows Compatible |
Windows Compatible |
Accessories |
Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun, Ratchet Wrench |
Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun, Ratchet Wrench |
Option |
Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor |
Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor |
Power Source |
AC 200 V, 1-Phase, 10 A, 50/60 Hz |
AC 200 V, 1-Phase, 10 A, 50/60 Hz |
Air Source |
0.5 MPa or More |
0.5 MPa or More |
Dimensions/ Weight (Approx.) |
W620 × D650 × H1,170 mm/ 153 kg |
W620 × D600 × H1,460 mm, 205 kg |