145-D RETENTIVITY TESTER
24 ตุลาคม 2567
ผู้ชม 14 ผู้ชม
- This tester is to evaluate the retentivity of adhesive tape and sheet.
- By attaching one end of the test specimen to the testing plate for 25 mm squares and applying load to the other end of the test specimen which is vertically hung down, the tester will measure the distance it got out of alignment or the time it required to fall off from the testing plate.
JIS Z0237
Specifications are subject to change without notice. |
|
Hangings |
3, 6, 10 or 20 Hangings (4 kinds) |
Specimen |
W25 mm or 12 ± 0.5 mm, L150 mm |
Test Plate |
W50 mm, L125 mm, T1.1 mm or More, Material: SUS304 Made |
Weight Load |
Initial 200 gf to Max. 1 kgf (Standard 1,000 g ± 5 g) |
Chuck |
Upper: Hook type |
Upper and Lower Chuck Distance |
200 mm |
Chuck Stroke |
Max. 45 mm, Electric Concurrent Elevating Device (Up and Down Automatic Stop) |
Temperature Range |
Max. 150 °C |
Timer |
Preheating Time Setting, Drop Time Measuring, Test Time Setting |
Option |
Displacement Measurement Spec, Low Temperature Oven, Constant Temperature & Humidity Oven, Oven Light, |
Power Source |
Differ by Specifications. |
Dimensions/ Weight (Approx.) |
Differ by Specifications. |