สกุลเงิน
ภาษา
ตะกร้าสินค้า

148-HD HEAT DISTORTION TESTER

หมวดหมู่สินค้า: HDT Vicat Tester

22 ตุลาคม 2567

ผู้ชม 16 ผู้ชม

 

Contact

TEL02 080 7285 , 065 982 7285


  • This tester is used to evaluate the heat resistance of plastic.
  • By loading specified bending stress to the test specimen while increasing the test temperature of the oil bath at a certain rate, the operator is to report the temperature at which the test specimen reaches standard deflection.
  • The tester can also conduct the VICAT softening temperature test.



JIS K7191-1、K7206、ASTM D648、D1525、ISO 75-1、306


Specifications are subject to change without notice.

Model

No.252-UL-94 (MANUAL)

No.252-UL-94 (ELECTRIC SYSTEM)

Chamber

1,000 × 560 × 900 mm(Volume Approx. 0.5 m3)

1,000 × 560 × 900 mm(Volume Approx. 0.5 m3)

Specimen

L125 ± 5 mm, W13.0 ± 0.5 mm, T13 mm or less

L125 ± 5 mm, W13.0 ± 0.5 mm, T13 mm or less

Burner

L100 ± 10 mm, Inner Diameter φ9.5 ± 0.3 mm

L100 ± 10 mm, Inner Diameter φ9.5 ± 0.3 mm

Burner Base

Slide type (With Operation Handle), Inclination Angle 45 ± 2°, 20 ± 5° (5 V)

Slide type (With Jog Dial type Controller), Inclination Angle 45 ± 2°, 20 ± 5° (5 V)

Burner Calibration Device

Flow Meter: Max.150 ml/min (Scale 2 ml/min) (Standard 105 ml/min)
Flow Meter: Max. 1,000 ml/min (Scale 10 ml/min) (Standard 965 ml/min)
Manometer: Max. 200 (± 100) mmH2O (Scale 1 mmH2O) (Standard 10 mmH2O)
Timer, Built-In Thermometer

Flow Meter: Max.150 ml/min (Scale 2 ml/min) (Standard 105 ml/min)
Flow Meter: Max. 1,000 ml/min (Scale 10 ml/min) (Standard 965 ml/min)
Manometer: Max. 200 (± 100) mmH2O (Scale 1 mmH2O) (Standard 10 mmH2O)
Timer, Built-In Thermometer

Accessories

Flame Gauge (20 mm) (Option: 125 mm & 38 mm), Ring Stand,
Wire Mesh, Dry Cotton Pad, Fireproof Gloves

Flame Gauge (20 mm) (Option: 125 mm & 38 mm), Ring Stand,
Wire Mesh, Dry Cotton Pad, Fireproof Gloves

Option

Horizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V), Spring Clamp (VTM), Foam Support Fixture

Horizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V), Spring Clamp (VTM), Foam Support Fixture

Power Source

AC 100 V, 1-Phase, 15 A, 50/60 Hz

AC 100 V, 1-Phase, 10 A, 50/60 Hz

Heat Source

Methane Gas (Purity: 98 % Over)

Methane Gas (Purity: 98 % Over)

Dimensions/ Weight (Approx.)

W1,400 × D700 × H1,220 mm 100 kg

W1,400 × D700 × H1,220 mm 218 kg





















 

Engine by shopup.com