TH 
- This tester is used to measure the Inclination Angle(Static Friction Coefficient) when the test specimen of enabled wire starts sliding.
- Fix 2 specimens parallel to one another onto the Sled and Inclination Board.
- Put the tension to 2 specimens on the board. Set the Sled on the Board, making each specimen get crossed when the Angle is 0°.
- Measure the Angle when the Mass starts sliding while the Board gets inclining at a certain speed. Static Friction Coefficient will be calculation as tanθ from the measured Angle.
-
|
Specifications are subject to change without notice. |
||
|
Model |
No.162-EW |
No.162-EWD |
|
Sled |
W120 mm, L120 mm, Mass 500 g |
W120 mm, L120 mm, Mass 500 g |
|
Inclination Angle |
0 to 90° (Scale 0.2°) |
0 to 90° (Scale 0.2°) |
|
Inclination Speed |
0.5°/s |
0.5°/s |
|
Option |
Changeable Inclination Speed Spec |
Changeable Inclination Speed Spec |
|
Power Source |
AC 100 V, 1-Phase, 3 A, 50/60 Hz (Motorized) |
AC 100 V, 1-Phase, 5 A, 50/60 Hz |
|
Dimensions/ Weight (Approx.) |
W750 × D270 × H425 mm/ 30 kg |
W750 × D270 × H425 mm/ 30 kg |
