TH 
162-FS SLIP TESTER (HORIZONTAL METHOD)
09 กันยายน 2567
ผู้ชม 5 ผู้ชม
- This tester is used to measure the friction coefficient of plastic film and paper according to the horizontal method.
- The operator is to attach the test specimen to the sliding surface and sliding sled, then pull the sled with a metal wire that is connected to a load cell to acquire the static coefficient of friction and dynamic coefficient of friction.
JIS K7125、P8147、ASTM D3247、ISO 8295、TAPPI-T816
|
Specifications are subject to change without notice. |
||
|
Test Method |
Paper and Paperboard |
Plastic Film |
|
Abrading Head |
W60 mm, L100 mm, Mass 1,000 g |
63 × 63 mm (Abrading Surface 40 cm2) |
|
Flat Board |
W200 mm, L380 mm |
W200 mm, L380 mm |
|
Specimen |
Surface: W100 mm, L250 mm |
W80 mm, L200 mm, T0.5 mm or Less |
|
Friction Measuring |
Load Cell: Max. 10 N, 20 N, 50 N |
Load Cell: Max. 10 N, 20 N, 50 N |
|
Speed |
10.0 ± 0.2 mm/min |
100 ± 10 mm/min or 500 ± 10 mm/min |
|
Accessories |
― |
Accessory Plate (Mass Less than 5 g) |
|
Option |
Variable Speed Spec, Software, Recorder, Heating Plate Spec. |
Variable Speed Spec, Software, Recorder, Heating Plate Spec. |
|
Power Source |
AC 100 V, 1-Phase, 5 A, 50/60 Hz |
AC 100 V, 1-Phase, 5 A, 50/60 Hz |
|
Dimensions/ Weight (Approx.) |
W600 × D375 × H415 mm, 35 kg |
W600 × D375 × H415 mm, 35 kg |
