173-S ENAMELED WIRE STIFFENING POINT TESTER
หมวดหมู่สินค้า: Rubber testing and processing
31 ตุลาคม 2567
ผู้ชม 15 ผู้ชม
- This tester is used to measure the softening point of enameled wire according to the cross over method (method A).
- The operator is to bisect 2 straight test specimens over a metal block that is set at a desired test temperature and to load a ceramic piston on to the crossing point.
- The test is to be evaluated by whether the test specimen has softening short circuit after 2 minutes of test voltage is added.
JIS C3216-6: 2011
Specifications are subject to change without notice. |
|
Specimen |
Round wire(Crossing Method),Flat wire(Steel Ball Method) |
Hangings |
Max. 12 Hangings(4 Hangings × 3ch) |
Temperature Range |
Max.500℃ |
Heating Rate |
2℃/min |
Test Load |
Initial Load 100g to Max. Load 2,600g |
Transformer |
Voltage: 100 ± 10V, Short Circuit Current: 5 ± 1 mA (Max. Ampair: 50 mA) |
Data Processing |
Desktop PC (OS: Windows 10) PC Rack,Printer, Software included |
Safety Device |
Leakage Breaker, Overheat Detection, insulated Safety Cover (Pinch Prevention) |
Power Source |
Main Body: AC 200 V, 3-Phase, 50 A, 50/60 Hz , For PC: AC 100 V, 1-Phase, 15 A or less, 50/60 Hz |
Dimensions/ Weight (Approx.) |
W1, 800 × D750 × H2,000 mm/ 550kg |