PENCIL SCRATCH HARDNESS TESTER (ELECTRIC SYSTEM) No.553-M (Yasuda Seiki)

This pencil-hardness tester for coatings features an automated, motor-driven test arm that ensures the movement of the pencil strictly adheres to specified testing conditions. It is ideal for evaluating the hardness of coatings and conducting quality control of materials in a laboratory setting. A dual-arm configuration is also available, allowing for simultaneous testing with two pencils, thereby enhancing testing efficiency.

Key Feature

  • Electric propulsion system Automated mobile test arm, replacing manual movement
  • Movement speed can be adjusted. The standard speed specified by the manufacturer is 0.5–1 mm/s.
  • The test pressure can be adjusted. Supports a maximum test force of 1 kgf, adjustable in increments or decrements of 50 gf.
  • Supports testing with pencils of various hardness levels The list of standard equipment specified by the manufacturer includes 17 Mitsubishi uni pencils, ranging from 6B to 9H in grade.
  • Supports 2 types of test environments These include M-1 and M-2, allowing for a choice based on the characteristics of the workpiece.

Reference Standards

JIS (C3003), C3216-4, D0202, (K5400), K5600-5-4, K5651, K6894, K6902, K7317, ASTM D2197, D3363, ISO 15184, IEC-60851-4

Specification

Model No.553-M
Test Area • M-1: 100 × 180 mm
• M-2: 150 × 180 mm
Stroke Length Side-to-side: max. 100 mm, front-to-back: max. 50 mm
Pencil Angle 45˚ (option: for enameled wire 60˚)
Travel Speed Adjustable motor control (standard speed 0.5–1 mm/s)
Test Load Max. 1 kgf (loaded by a counterweight and additional weights)
* Load adjustable by 50 gf
Accessories Mitsubishi uni pencil (6B–9H, total 17 pencils), steel needle (1 pc), pencil sharpener, sandpaper #400, spirit level
Options Heating table, device for short circuit detection, enameled wire test compatibility, arm height adjustable specification for thick samples, stroke length limit sensor, JIS K7317 test compatibility (diamond tip needle, weights, glass plate)
Power Source AC 100 V, 1-phase, 3 A, 50/60 Hz
Dimensions & Weight
(Approx.)
• M-1: W440 × D200 × H440 mm, 20 kg
• M-2: W440 × D260 × H440 mm, 27 kg

FAQ Section

Q1: How does the No.553-M hardness tester differ from the manual (hand-operated) model?

A1: Model No.553-M utilizes an electric motor-driven system, ensuring consistent pencil movement and uniform applied pressure. This contrasts with manual models, which rely on hand-cranking—a process prone to jerky motions or uneven pressure—thereby making the electric version more accurate and reliable for testing purposes.

Q2: What range of pencil hardness levels does the device support, and which specific pencil models should be used?

A2: The device supports testing using a standard set of pencils with hardness grades ranging from 6B to 9H (covering 17 levels in total). Factory-supplied standard sets typically feature Mitsubishi UNI pencils, which are internationally recognized for use in paint film testing.

Q3: Can this model accommodate the testing of specimens under heat or other specific conditions?

A3: Yes, the unit offers optional add-ons, such as a heating plate for testing specimens at high temperatures, a conduction device, or specialized needles for specific analytical applications.

©︎2026 SMART PHAT GLOBAL CO., LTD. All Rights Reserved.