TEMPERATURE RETRACTION TESTER (TR TESTER) No.145-L (Yasuda Seiki)

The TR Tester is used to evaluate the recovery characteristics of rubber. In the automotive, aerospace, and mechanical engineering industries, components such as seals, gaskets, and O-rings are often required to operate in low-temperature environments. As the temperature drops, rubber begins to lose its elasticity, becoming rigid and prone to leakage. Yasuda’s TR Tester allows for the determination of TR10, TR30, TR50, and TR70 values—points at which the rubber begins to recover from a low-temperature state—enabling the selection of the appropriate rubber grade prior to actual production.

SKU: 145-L Category: Tags: , , Brand:

Key Feature

  • rubber performance testing at low temperatures: Evaluation of the elastic recovery of vulcanized rubber and thermoplastic rubber O-rings under low-temperature conditions.

  • Automated result analysis using high-resolution sensors: Utilizes Linear Optical Sensor technology to measure return distance with an error margin of no more than ±0.1 mm, accompanied by PC-based processing software.

  • Compliant with international industry standards: Up to 4 to 6 specimens can be tested simultaneously per run, helping to reduce laboratory turnaround time.

  • Enhancing the credibility of rubber products and O-ring seals: Prevents rubber components from hardening, seizing, or leaking during actual operation at low temperature environmental conditions.

Reference Standards

JIS K6261-4、ASTM D1329、ISO 2921

 

Specification

Specification 4 Samples Configuration 6 Samples Configuration
Number of Test Samples 4 or 6 samples per test
Test Sample I-shape  |  Grip Length: 6.5 × 6.5 mm
Reference Length: Width 2.0 ± 0.2 mm × Length 100.0 ± 0.2 mm or 50.0 ± 0.2 mm × Thickness 2.0 ± 0.2 mm
Grip Distance 50 mm, 100 mm
Displacement Measurement Linear optical sensor  |  Accuracy: ± 0.1 mm  |  Max. Stroke Length: 200 mm
*Stroke length is adjusted upon request.
Temperature -70 to 30 °C (refrigeration control with heat transfer medium)
Option: Up to -100 °C by adding liquid nitrogen cooling
Heat Transfer Medium Approx. 27 L
Heating Rate 1 °C/min
PC Software Available for Windows
Options Safety cover, sample holder for O-rings, cutting die
Power Source AC 200 V, 3-phase, 30 A, 50/60 Hz
Dimensions & Weight (Approx.) W1,110 × D830 × H2,020 mm
350 kg
W1,200 × D1,000 × H2,020 mm
373 kg
*Above are dimensions based on a maximum configuration stroke length of 200 mm.
*Height reaches H2,370 mm when the internal test rack is raised to maximum height.

FAQ Section

Q: What is the significance of the TR (Temperature Retraction) test in the production of rubber components?

A: The TR test measures the elastic recovery of rubber as its temperature rises following stretching at sub-zero temperatures. The resulting values ​​(such as TR10 or TR70) precisely identify the temperature at which the rubber begins to regain its functionality and elasticity—a critical factor for evaluating the sealing performance of gaskets and O-rings in extremely cold conditions.

Q: What is the minimum temperature (in degrees Celsius) that the TR Tester model No.145-L can reach through its cooling system?

A: Standard models equipped with a heat transfer medium cooling system can achieve temperatures as low as -70°C And if a liquid nitrogen cooling accessory is installed, the testing capabilities can be extended down to a minimum temperature of -100°C

Q: Which testing standards does this device support, and can it be connected to a computer?

A: The TR Tester No.145-L is designed according to international standards. JIS K6261-4, ASTM D1329 และ ISO 2921 Comes complete with PC software that supports the system Windows Enables the rapid and professional generation of graphs, analysis of rubber rebound values, and production of test result reports.

©︎2026 SMART PHAT GLOBAL CO., LTD. All Rights Reserved.